11 Steps to Increase Paint Protection on Your Vehicle

If you’re like most people, you want your car to look as good as new for as long as possible. One way to protect your paint job is by installing paint protection film around the Buford, GA area. This film helps keep your paint looking shiny and new by protecting it from scratches, chips, and other debris. In this article, we will discuss 11 steps that will help increase the paint protection on your vehicle!

What is paint protection film?

The paint protection film is a clear, durable, and adhesive-backed film that is applied to the paint of your vehicle. This film helps protect your paint from scratches, chips, birds, bugs, and other debris. It is also UV resistant, so it will help keep your paint from fading in the sun.

Here are the 11 steps to increase paint protection on your vehicle:

Choose the right paint protection film

There are many different types of paint protection film on the market, so it’s important to choose one that is right for your vehicle. If you’re not sure which type of film to choose, consult with a professional or do some research online.

Prepare your vehicle for installation

Before you install paint protection film, you need to make sure your vehicle is clean and free of any dirt, dust, or debris. This will help ensure that the film adheres properly to your paint.

Cut the film to size

Once you have your paint protection film, you will need to cut it to size. This can be done with a razor blade or a pair of scissors. Be sure to measure twice and cut once!

Wet the surface

Before you apply the paint protection film, you will need to wet the surface of your vehicle with soapy water. This will help the film adhere better to your paint.

Apply the paint protection film

Now it’s time to apply the paint protection film. Start at one end and slowly work your way across, being careful not to trap any air bubbles under the film. If you do get air bubbles, use a needle or a razor blade to release the air.

Trim the excess film

Once you have applied the paint protection film, you will need to trim off any excess film. You can do this with a razor blade or a pair of scissors. Be sure to follow the contours of your vehicle so that the film looks flush with the paint.

Clean the surface

After you have trimmed the excess film, you will need to clean the surface of your vehicle. This will remove any dirt, dust, or debris that may be on the surface of the film.

Apply heat

Applying heat to the paint protection film will help it adhere better to your paint and will also make it more durable. You can use a hairdryer or a heat gun to apply heat to the film.

Squeegee the film

Once you have applied heat to the paint protection film, you will need to squeegee it. This will help remove any air bubbles that may be under the film.

Trim the edges

After you have squeegeed the paint protection film, you will need to trim off any excess film around the edges of your vehicle. You can do this with a razor blade or a pair of scissors. Be sure to follow the contours of your vehicle so that the film looks flush with the paint.

Enjoy your new paint protection!

Now that you have installed paint protection film on your vehicle, you can enjoy peace of mind knowing that your paint is protected from scratches, chips, and other debris. This film will also help keep your paint looking shiny and new for years to come!

Thanks for reading and we hope this article was helpful. If you have any questions, please feel free to contact us at paint protection film Buford GA. We would be more than happy to assist you. Thank you!

US Auto Spa
1960 Skylar Hill Dr Suite C, Buford, GA 30518, United States
770-380-3261